Suggested pace 90% -
Estimated pace to aim for based on your best efforts in the last 6 weeks (or the most
recent before that)
Off110%
Past workouts
Tap any row for its splits, force curve and pace charts.
Date
Start
Distance
Pace
Time
Avg HR
Type
Splits
Strava
Concept2
No saved workouts.
No workouts match these filters.
Logbook
Saved workouts-
Fit on one USB stick export-
Workout
Activity
Monthly distance
No saved workouts.
Month
#
Time
Distance
Avg/day
No saved workouts.
Aerobic efficiency
Watts per heartbeat on steady rows. Rising means the same effort
costs your heart less. How this works
-
Aerobic efficiency over time
Pair a heart rate strap and row a workout to see this.
Rowing rhythm
No steady rows yet. Row a piece of 1 000 m or more to see your rhythm.
All time
Season
-
-this season
-
PBs this season
-
Longest streak this season
-
Busiest month
-
Best efforts
-
Row a full 100 m, 500 m, 1 000 m, 2 000 m,
5 000 m, 10 000 m, half marathon or marathon in one go to see your best efforts here.
Power curve
The best power you have held over each distance, across every row in the period.
Pace curve
Your fastest pace over each standard distance, across the same rows.
Row a few more sessions to build up a best-effort curve.
FTP
Functional threshold power: the highest power you can hold for about an
hour, fit from your best efforts above.
How this works
-W
-
FTP over time, from the 90 days to each month's end
Zones
Training zones as a share of FTP.
Zone
% FTP
Watts
Pace /500m
Row a hard piece somewhere between 3 and 20
minutes, and another at a different length, to estimate your FTP.
Technique
-
Row a few more workouts to see this.
Consistency
Less distanceMore distance
No saved workouts.
-
Current streak
-
Longest streak ever
Favourite time to train
-
No saved workouts.
Day of week
No saved workouts.
Lifetime rowing
-total distance
-
-
Marathons rowed
-
Channel crossings
-
Movies' worth of time
Performance Monitor (PM)
-
Serial-
Monitor-
Upgrading your PM3 firmware is highly recommended. This monitor runs
software version -, older than version
-.
Download Concept2 Utility on a computer, plug the PM3 into it over USB and follow
the update prompt.
Last recorded drag factor-
Authentication-
Heart rate sensor
-
Pair a strap to send your heart rate to the PM3 and to connected apps.
How it works
Plug the 3.5 mm headphone connector into the PM3 and it shows your heart rate
on its own screen. The wiring guide
shows how to build that connector.
Paired sensorNone
Strava
-
Upload finished workouts to Strava, automatically as they happen or one at a
time from the Workouts tab.
Connected as-
Auto-upload is still on, but nothing uploads
until you connect again. Workouts saved in the meantime can be sent from the Workouts tab.
Upload new workouts automatically
When off, upload individual workouts manually from the Workouts tab.
Concept2 Logbook
-
Upload finished workouts to your Concept2 Logbook, automatically as they happen
or one at a time from the Workouts tab.
Auto-upload is still on, but nothing uploads
until you connect again. Workouts saved in the meantime can be sent from the Workouts tab.
Upload new workouts automatically
When off, upload individual workouts manually from the Workouts tab.
Weight class
Required by Concept2 on every upload. Lightweight is under 75 kg
(165 lb) for men or 61.5 kg (135.5 lb) for women; anyone heavier is heavyweight.
ANT+ broadcasting
-
Sends your rowing to ANT+ watches, which pair with it as they would with a rowing
machine. Needs a spare ANT+ USB stick and a free ANT+ network key.
How it works
This device shows up as a Fitness Equipment sensor. The stick plugs into the same
hub as the PM3. The network key is only for broadcasting: the Heart rate sensor card's ANT+
source uses the same stick to receive from a strap without it.
Learn more
Network keyNot set
Broadcast rowing data over ANT+
Turn off if you only want ANT+ heart rate reception and don't want this
device visible to ANT+ watches as a rowing machine.
ErgDog Hardware
-
Uptime-
Free memory-
This device is low on memory. Uploads to Strava and the Concept2 Logbook,
and this page itself, may start failing or timing out. Restarting the device clears
it. Your stored workouts are not affected.
WiFi signal-
IP address-
Workout logbook-
Room for about-
Workout saving
Save workouts on this device
Keeps each finished row for the Workouts tab, backups and the Concept2 Utility.
How it works
Saved workouts show on the Workouts tab and go into a backup. To get them into
the Concept2 logbook, plug a flash drive into this device, then upload them from it with the
Concept2 Utility.
Smallest workout to save
Saved if it reaches either one. 0 turns that one off; both 0 saves every row.
Record force curve
Keeps each row's drive shape for its detail view. About 11% fewer workouts fit.
Time and date
Monitor clock (last known)-
Internet time-
Sets the PM3's clock from internet time now. Not while a workout is set up and waiting.
How the time is set
Internet time is what dates your workouts and sets the monitor's clock. If it and
a connected app's clock are both unavailable (rowing outdoors, say), this device reads the time
from the monitor itself instead, but only once it has learned the monitor's authentication frame
(see Authentication on the Connections tab).
Setting the clock can briefly drop the PM3's USB connection, so avoid it while a
workout is set up but not started. It is skipped when the monitor's clock is already within a
couple of minutes, which needs the same authentication to check.
Automatically set PM3 clock
At startup and when ErgData connects, never while rowing. Off by default: it
briefly restarts the PM3's USB link.
How it works
Set from internet time at startup, and again whenever ErgData connects. At
startup it is skipped when the monitor's clock is already within a couple of minutes (the same
authentication is needed to check); without that, every correction sets the clock outright.
It waits until the timezone below is confirmed. This only controls what happens on its own:
"Sync PM3 clock now" above works either way.
Timezone
From your browser or ErgData. Pick one to set it yourself.
PM3 power
Automatically put the PM3 to sleep
Cuts USB power after 11 minutes without rowing, so the PM3 sleeps about 15
minutes after your last stroke. A Bluetooth app wakes it. Default on.
Needs
extra hardware that this device does not have: a switch in the 5V supply wire, wired to
a spare pin. Nothing else can cut the PM3's power, so this setting has no effect until
it is built and configured.
How it works
The PM3 never sleeps on its own while this device supplies it USB power. Only
cutting that power lets it fall back to its own battery-powered sleep. You can also put it to
sleep yourself any time by pressing the PM3's menu button three times quickly, whatever this
is set to.
USB power comes back the moment you connect with a Bluetooth rowing app, or
when you restart this device, so this is safe to leave on if that is how you row (most people
do). If you row without a Bluetooth app (ANT+ only, say), waking the PM3 needs either the
optional tip-wake sense circuit, or pressing the PM3's power button and then restarting this
device.
Both putting the PM3 to sleep and noticing when it wakes on its own need extra
hardware: a switch in the 5V supply wire, and a sense wire on the HR jack's tip contact. Both
are optional, and neither is needed to use this device.
Wiring guide
Firmware
Update available
Automatically check for updates
Backup and export
Back up
Every workout on this device in one file, to restore here later.
It is the same set of files a USB stick plugged into this device would get, ready
for the Concept2 Utility, without bringing a stick to the device. Unzip it onto a FAT32-formatted
USB stick, keeping the Concept2 folder at the top level, then plug the stick into a
computer running the Concept2 Utility.
Experimental
Newer than the rest of the device, so both stay off until you turn them on.
Workout of the Day
Concept2's daily workout on the Workouts tab, with a pace for each piece from
your own bests. Default off.
How it works
The card sits at the top of the Workouts tab, with a suggested pace for each
piece drawn from your own recent bests. When this is off, the card is hidden and this device
makes no daily call to Concept2 for it.
Big numbers for a tablet
A link on the Home tab to a full-screen page of your pace, heart rate and force
curve, for a tablet on the erg. Default off.
How it works
The page is big enough to read from the erg, meant for a spare tablet or an old
phone on the handlebars. Turning this off only hides the link, so a page you have already
bookmarked keeps working.
Help and maintenance
Live logs
What the device is doing, for finding or reporting a problem.
Not affiliated with, endorsed by or
connected to Concept2. Concept2, PM3, PM5 and ErgData are their trademarks, used here only
to describe what this device works with.